ODM Wallpaper Knife Company – High-quality hinge production factory – Xinzhe

Description

Description

Hinge Type Encyclopedia

The classification of hinges can be classified from many aspects such as shape and use, and the names of hinges of different classifications are also different. General hinges can be divided into ordinary hinges, pipe hinges, door hinges, bearing hinges, bevel detachable hinges, and cold storage door hinges.( door hardware/ door handles/ door knobs)

Ordinary hinges are generally used for doors and windows, etc., and the materials are generally iron, copper and stainless steel. However, ordinary hinges do not have spring hinges, so various bumpers must be installed after installation, otherwise the door will not close tightly.( door closer/ barn door hardware/ door stop)

Pipe hinges are also called spring hinges, which are mainly used for furniture and cabinet door panels, and are made of galvanized iron and zinc alloy.( door hinges/ door latch/ deadbolt)

Door hinges are divided into ordinary and bearing type. The bearing type is generally made of copper and stainless steel, and generally more copper is used.( pocket door hardware/ mortise lock/ deadbolt lock)

Bearing hinges are often used in heavy doors or steel plate doors with special steel skeletons, and the opening and closing are more flexible.( schlage smart lock/ kwikset smart lock/ black door knobs/ keyless entry door lock)

Inclined release hinges are generally used on half doors such as wooden doors or toilets.

The cold storage door hinge is used on the cold storage door or insulation door.( schlage keypad lock/ door lock latch door lock set/ front door lock set)

How to install the hinge

1. When installing the cabinet door hinges, determine the minimum gap between the cabinet body or the cabinet doors, otherwise it is easy to collide with the cabinet doors, which will affect the beauty and practicability of the cabinet.( hardware accessory/ curtain rod)

2. After determining the distance between the cabinet body and the door body, it can be installed according to the selected hinge. The installation height is generally around 1200-1500mm. If the weight of the door panel is between 9-12KG, three hinges must be installed.( door hinge towel rack/ undermount sink bracket/ hooks)

Precautions:

1. Pay attention to the installation position and quantity. In theory, the larger the distance between the two hinges, the stronger the bearing capacity. Of course, this also needs to consider the actual situation. For heavy household doors, three hinges can be used. For ordinary doors, two hinges can be used. OK.( coat rack/ coat hooks/ wall hooks)

2. Prevent falling fans Falling fans refer to poor installation of doors and windows. The upper gap gradually increases while the lower gap gradually decreases, resulting in poor switching, and in severe cases, it will fall off. Generally, the reason for this situation may be due to the selection of a hinge that is too small, or the lack of matching screws.( over the door hooks/ wall hanger/ magnetic hooks)