Customized galvanized stamping elevator bracket 90 degree angle bracket

Description

Interior combination of elevator shaft

1. Elevator car: This is the main part inside the elevator shaft. It carries passengers and goods and realizes up and down movement.

2. Guide rails and compensation ropes: Guide rails are components that support the elevator during operation. They are usually made of materials that can withstand weight, such as steel, aluminum, or iron. The compensation rope is used to balance the weight of the car and ensure the smooth operation of the elevator.

3. Driving unit: mainly includes motors, reducers, brakes and other devices, used to drive the elevator to move up and down. The motor and its controller are usually installed at the top or bottom of the elevator shaft, and the controller is installed in the control cabinet inside the elevator shaft.

4. Safety devices: including buffers, safety gears, etc., used to ensure the safety of passengers when the elevator fails. Buffers are usually installed on the floor of the hoistway pit, and are also installed at the bottom of the car or counterweight. Safety gear is a safety device that can automatically stop the elevator car on the guide rail when the elevator overspeeds or loses control.

5. Hoistway lighting and ventilation equipment: Permanent lighting should be installed in the hoistway to facilitate the work of maintenance personnel. At the same time, ventilation equipment should be installed in the hoistway to maintain air circulation and prevent dangerous situations such as suffocation inside the elevator.

In addition, the interior of the elevator shaft may also include other components, such as speed governor tensioning device, accompanying cables, speed changing devices, limit devices, limit switches, etc., to achieve normal operation and safety protection of the elevator. The setting and installation of these components need to comply with relevant standards and specifications to ensure the safety and reliability of the elevator.